Advertisement
2.
Unscrew the Water Spill Valve (11) two to three turns.
3.
When all pressure is released, close the valve again. Plug in the electrical plug.
1.
Check compressor oil level daily. Fill if necessary with 30-weight, non-detergent
oil.
2.
Purge the Air Tank daily of all air and moisture to prevent corrosion.
3.
Store the Air Compressor in a clean and dry location.
4.
Check all air fittings for leaks before using.
5.
To extend the life of your air tools, it is recommended to install an oiler and water filter
in series with the air output line of the Air Compressor (sold separately) as shown
below.
Note: The Handle (#5) includes a flat plate which is designed to accept an air hose reel (not
included).
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBU-
TOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 46168
Maintenance
PLEASE READ THE FOLLOWING CAREFULLY
NOTE: Some parts are listed and shown
for illustration purposes only and are not
available individually as replacement parts.
Page 6
REV 02/02
REV 02/04
Advertisement
