Maintenance - Central Pneumatic 93657 Owner's Manual & Safety Instructions

Oilless airbrush compressor

Hide thumbs Also See for 93657:

Maintenance and Servicing

Procedures not specifically explained in this manual must

be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Turn the Power Switch "OFF" and unplug the Compressor from its electrical outlet

before performing any inspection, maintenance, or cleaning procedures.

TO PREVENT SERIOUS INJURY FROM COMPRESSOR FAILURE:

Do not use damaged equipment. If abnormal noise or vibration occurs,

have the problem corrected before further use.

Cleaning, Maintenance, and Lubrication

1. BEFORE EACH USE, inspect the general

condition of the Air Compressor.

Check for loose hardware, misalignment or binding

of moving parts, damaged belts, cracked or broken

parts, damaged electrical wiring, and any other

condition that may affect its safe operation.

2. AFTER USE, push the Water Drain Valve (41)

under the Filter Cup to drain out the moisture.

Also, wipe external surfaces of the

compressor with a clean cloth.

Page 8

For technical questions, please call 1-888-866-5797.

3. Store the Air Compressor in a clean, dry,

safe location out of reach of children

and other unauthorized people.

WARNING! TO PREVENT SERIOUS

INJURY: If the supply cord of this

compressor is damaged, it must be replaced

only by a qualified service technician.

Item 93657

Table of Contents