Table of Contents
Advertisement
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURy FROM AccIDENTAL OPERATION:
Turn the power switch "OFF" and unplug the motor from its electrical outlet before
performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURy FROM cOMPRESSOR FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1. BEFORE EAcH USE, inspect the general
condition of the Compressor Pump. Check for:
• low oil level
• loose hardware
• misalignment or binding of moving parts
• worn, cracked, or damaged belts
• cracked or broken parts
• any other condition that may
affect its safe operation.
Maintenance Schedule
Following are general guidelines for maintenance checks of the Air Compressor Pump.
Note: The environment in which the Compressor Pump is used, and the frequency of use can affect
how often you will need to check the pump components and perform maintenance procedures.
Daily:
a. Check oil level.
b. Check for oil leaks.
c. Make sure all nuts and bolts are tight.
d. Check for abnormal noise or vibration.
e. Check for air leaks.
f. Inspect belts.
g. Wipe off any oil or dirt from
the Compressor Pump.
* To check for air leaks, apply soapy water to joints while
the Air Compressor is pressurized. Look for air bubbles.
** To clean the compressor pump surface, wipe with
a damp cloth, using a mild detergent or mild solvent.
Item 67698
*
**
For technical questions, please call 1-888-866-5797.
2. AFTER USE, wipe external surfaces of
the compressor with a clean cloth.
Weekly:
a. Inspect Air Filters.
b. Inspect Oil Breather Plug.
Monthly:
Check belt adjustment.
Every 6 months or 100 Operation Hours:
***
Replace Pump oil.
*** Use SAE 30W, non-detergent,
Air Compressor Oil only (sold separately).
Page 11
Advertisement
Table of Contents
