Advertisement
Quick Links
®
HOTDOG COMPRESSOR
4 GALLON - 2 HP
Model 45214
ASSEMBLY and OPERATING
INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2001 by Harbor Freight Tools
®
. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Advertisement
Related Manuals for Central Pneumatic 45214
Summary of Contents for Central Pneumatic 45214
- Page 1 ® HOTDOG COMPRESSOR 4 GALLON - 2 HP Model 45214 ASSEMBLY and OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright © 2001 by Harbor Freight Tools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
- Page 2 There are certain applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended. Do not use to fill air/breathing tanks. Page 2 REV 02/04 SKU 45214...
- Page 3 19. Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical Page 3 SKU 45214...
- Page 4 When unpacking, check to make sure the parts listed on pages 7 and 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Page 4 SKU 45214...
- Page 5 Note: If you need to quickly depressurize the air compressor, turn it off by pressing the Air Pressure Switch (A-10) down, then, pull out the Safety Valve Ring (#A-4). Page 5 REV 02/04 SKU 45214...
- Page 6 3. Blow air and clean out the cylinder cooling fins on Cylinder Head (#B-5). Weekly. 1. Remove the Air Filter (#B-4), wash it with water, allow it to dry, then install it. To remove filter, remove the Screw (#B-2) and Washer (#B-3). Reverse procedure to re-install. Page 6 REV 02/04 SKU 45214...
-
Page 7: Parts List
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. Page 7 SKU 45214... - Page 8 B-34 Capacitor B-15 Oil Ring B-35 Bearing B-16 Piston B-36 Oil Seal B-17 Piston Pin B-37 B-18 Crankshaft Retainer 2 B-38 Thermal Switch B-19 Dipstick B-39 Crankshaft Case B-20 Screw B-40 Washer Page 8 REV 11/01 REV 02/04 SKU 45214...
- Page 9 Assembly Drawing 1 Page 9 SKU 45214...
- Page 10 Assembly Drawing 2 Page 10 REV 11/01 REV 02/04 SKU 45214...