baltur BTL 3 User Instruction Manual page 37

BURNER CONNECTION TO THE BOILER
• Apply the isolating seal -13 between the flange that fastens the
burner and the boiler plate.
• Fasten the flange -25 to the boiler using the stud bolts with their
nuts and washers -7
• Insert the burner into the flange and tighten the screw -5 with
the nut -9.
DANGER / CAUTION
When fixing the burner to the flange, position the combu-
stion head axis as illustrated in the diagram (angle A).
HOSE INSTALLATION DIAGRAM
The hoses must be positioned as indicated in the figure, to pro-
perly close the cover. They may come out of the burner from the
lower part or from the left side.
9 / 26
0006080735_201409
ENGLISH
5 9
A
7 25 13