Entering Stopover Destination - Mercedes-Benz COMAND Operator's Manual

Navigation
Destination Input
Moving the Map and Selecting a Desti-
nation
To move the map: Press %, $,
( or &.
To set the map scale: Press Í
or Ì.
The map scale is displayed.
To enlarge the map: Press Í.
To reduce the map: Press Ì
To select a destination: Press C
once or repeatedly until you get a list of
destinations if available.
To select a destination: Press %
or $.
Press C.
74
If the destination is within the digital
map, COMAND tries to find the desti-
nation on the map.
If the destination can be found, the En-
ter Destination menu is displayed with
the address of the destination. Other-
Destination
wise you will see the entry
From Map
.
To start route calculation: Select
Start
, see also ( page 70).

Entering Stopover Destination

i
If route guidance is active, you can enter a
stopover destination. Stopover destinations may
be predefined destinations in the following cate-
gories suggested by COMAND for you to select:
ATM/Cash
Hospital
Gas Station
Parking Lot
Restaurant
However, you can also enter destinations other
than those that have been predefined. Select the
menu item OTHER for this purpose.
You can influence the route guidance to the main
destination in a specific way using the stopover
function. Once the stopover destination has
been reached, COMAND automatically recalcu-
lates the route to the main destination.
Entering predefined Destinations
If necessary switch to navigation mode
and display menu system ( page 53).
Destination Stopover
Select
£
.