COMAND will complete your entry if
the name is unambiguous. In this case
it is not necessary to switch to the list,
the Enter Destination menu will appear.
Selecting a List Entry
Town list for navigation
To select a town: Press $ or %.
To confirm selection: Press C.
Operating Example
Switching to Radio Mode and Request-
ing the List of Preset Stations
Initial situation:
You would like to switch, for example, from
the phone function to radio mode and re-
quest the presets list from there.
i
In this guide, the path to a menu item is
shown as an action in a special typeface.
Audio
Audio
£
£
FM/AM Radio
Radio
Presets
£
£
i
Depending on the initial situation, this se-
quence of actions may be shorter.
If radio mode was active last, it is sufficient to se-
lect Audio
FM/AM Radio
Presets.
£
£
The individual steps for the above example
are described below.
At a glance
Operating COMAND
Switching to the Current Audio Mode
To switch to the main function line:
Press $.
To select Audio main function:
Press & or (.
To confirm selection: Press C.
The main display for the audio mode
selected last, e.g. CD audio, appears.
The selector bar is located in the main
area.
1 Selector bar
29