Basic Functions of COMAND
i
The COMAND components can be found on
( page 16). Operating examples can be found
on ( page 26).
i
For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. for volume setting the æ, ç
buttons, (
page 21).
Switching COMAND On/Off
Press the rotary/push button
A warning message appears. COMAND
opens the last active menu.
Mute
To switch on/off: Press F.
The sound from the active audio or
video source is switched on or off.
i
When the sound is switched off, the symbol
X appears in the status line.
If you change the audio or video source or alter
the volume, the sound is automatically switched
on again.
i
Announcements from the navigation system
can still be heard with the sound switched off.
Switching Navigation Announcements
On/Off
Press F during the announcement.
The navigation announcements are
switched on again after restarting route
guidance or after switching COMAND off/
on using x.
i
The navigation announcements can also be
switched back on by selecting the softkey
in the navigation menu.
x
.
Setting the Volume
To set:
Turn the rotary/push button
The volume of the selected audio or
video source changes.
Basic Functions of COMAND
Volume of Navigation Announcements
You can set the volume for navigation an-
nouncements independently of the volume
for the active audio or video source.
During a navigation announcement:
Turn the rotary/push button
Setting Volume for Phone Calls
6
The volume for hands-free operation can
be set during an active phone call.
Turn the rotary/push button
x
.
At a glance
x
.
x
.
31