Entering A Frequency; Preset Memory; Storing Stations Manually - Mercedes-Benz Audio 20 Operating Instructions Manual

X
Press the ó button once or several times
until the FM waveband,
the status bar.
X
Slide XVY or turn cVd when the main area
is selected.
or
X
Press the E or F button.
Station search scans up or down and stops
at the next station or channel found.
Selecting stations via the station
presets
X
With the controller (VÆ, XVY or cVd),
Presets
select and press W to confirm.
X
Select the desired station and briefly press
W.
Selecting stations via manual
frequency entry
X
With the controller (VÆ, XVY or cVd),
select Radio and press W to confirm.
X
Frequency Entry
Select
confirm.
i Only permissible numbers for the
frequency range can be entered in front of
the decimal point. If a non-permissible
number is entered after the decimal point,
the next lowest frequency is set.
X
Press numbers on the number pad.
Audio 2 0 sets the selected frequency.
Setting a station via the multifunction
steering wheel
MW or WB appears in
X
X
Storing stations

Storing stations manually

Ten stations can be stored for each
waveband.
i
X
and press W to
X
or
X
The # dot in front of a preset position
indicates that the station currently selected
is stored there.
In the audio menu in the instrument cluster:
press the 9 or : button briefly.
The next or the previous station from the
station list is set.
In the audio menu in the instrument cluster:
press and hold the 9 or : button for
longer than two seconds.
The previous or next station/channel in the
waveband will be set.
If a selected preset is already occupied,
the new station will be stored in place of
the old station.
Quick save: if the main area is selected,
press a number SmartKey (0 to 9) on the
number keypad until you hear a tone.
The station is now stored on the selected
preset.
Directly in the station memory: press
W when the main area is selected.
Select Presets.
The station preset display appears.
Radio mode
45