DCI Edge SERIES 4 Installation Instructions Manual page 7

INSTALLATION
SUPPORT WALL & LOWER CABINET
For cabinets with a Support Wall
Position the Support Wall in its final location in the installation area and align the back face of the Lower
1
Cabinet to it. Be sure the Lower Cabinet is centered against the Support Wall.
With a helper, use the 1/2" holes in the metal base frame to mount the Support Wall to the floor. Secure using
2
1/2" lag bolts (or 1/2" anchors for concrete).
Level the cabinet with the 4 levelers included. Note
3
that there are access holes inside the cabinets to use
the 5mm Hex tool provided.
4
Attach the Lower Cabinet to the Support Wall using the wood screws provided.
5
Use the provided floor mount brackets and
3/8" lag bolts (or 3/8" anchors for concrete).
Insert the lag bolt or anchor through the slot in
the bracket and drive the lag bolt into the floor to
secure the metal base to the floor.
Position the bracket inside
of the base and overlapping
the bottom flange.
SERIES 4 & SERIES 5 12 O'CLOCK CABINET
Installation Instructions
7