Table of Contents
Advertisement
Information on accessories
Pausing
Cancelling
The program should switch
on and off automatically.
Notes
Ovenware
Suitable dishes
If you always want cooking to be lighter or more
intensive, you can change it using "Adjust
individually".
To do this, refer to the basic settings section.
By pressing the Memory M" button, you can display
information on the accessories that are required.
Open the oven door. The cooling fan may run on.
Close the door and press the Start button again. The
oven continues operating as before.
If you forget to press the Start button, you will hear a
signal after three seconds. Press Start button"
appears in the display.
Press the Stop button twice or open the oven door
and press the Stop button once.
Please remember that easily spoiled foods must not
be allowed to remain in the oven for too long.
Make the settings as described in steps 1 to 4. Press
the clock button j until "Set end time" is displayed.
Use the rotary knob to set the end time to later, and
press the Start button again.
You cannot change the duration.
In some programs, stirring or turning is required. The
display will read Please turn" or Please stir". A signal
sounds. The text remains displayed until you open the
oven door or the program has finished.
The automatic programming function is only suitable
for roasting in a covered dish. Only use a roasting dish
with a suitable lid.
Suitable dishes are heat resistant (up to 300 ºC), glass
or glass ceramic dishes.
Add more fluid when roasting in enamalled steel,
cast-iron or pressed aluminium dishes. The food will
brown more.
Please observe the instructions of the dish
manufacturers.
27
Advertisement
Table of Contents
