Assembly And Adjustment; Operation; Adjustable Handle; Maintenance - Worx FORCEDRIVER WX270L Manual

ASSEMBLY AND ADJUSTMENT

Inserting and Removing the Bit
Cartridge
NOTE: Pull the outer ring of the
chuck forward in order to insert or
remove bits.
Forward/Reverse Switch
WARNING: Never change the
direction of rotation when the
chuck is rotating, wait until it is
stopped!

OPERATION

Operating the On/Off Switch
WARNING: Do not operate
for long periods at low speed
because excess heat will be
produced internally.

ADJUSTABLE HANDLE

The handle can be fixed at a 0°, 30°
or 60° position.
LED Light Indicator

MAINTENANCE

Your power tool requires no additional lubrication
or maintenance. There are no user serviceable parts
in your power tool. Never use water or chemical
See Fig.
cleaners to clean your power tool. Wipe clean
B1,B2
with a dry cloth. Always store your power tool in a
dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust. If you see
some sparks flashing in the ventilation slots, this is
normal and will not damage your power tool.
See Fig. C
See Fig. D
See Fig. E
13