Quick Start Guide - Quadra-Fire TREKKER INSERT series Owner's Manual

C. Quick Start Guide
1. Empty
2. Add pellets
5. From the OFF home screen press and hold the outer ring
6. Rotate to MANUAL FEED from the main menu and press
7. Rotate to ON, then press outer ring to start.
•
•
•
Note: The MANUAL FEED menu option is only available when your home
Note: MANUAL FEED is required during initial set up of the unit, or after the
8. From the home screen press the outer ring to access the set temperature; rotate
clockwise to raise the temperature and counterclockwise to lower the tempera-
ture.
Note: Refer to the Quadra-Fire Wireless User Interface manual for more infor-
January 8, 2019

QUICK START GUIDE

*Before you plug in this appliance, follow these instructions*
fi re box of
component
packet and
any other
debris.
and close
lid.
for 3 seconds to access the main menu.
outer ring to select.
OFF
65
The screen will display FEEDING; either wait for MANUAL FEED to complete
or press OFF to cancel feeding.
When MANUAL FEED completes the user interface will automatically set
POWER to ON and return to the home screen.
Refer to Quadra-Fire Wireless User Interface manual for more information.
screen reads OFF.
unit has alarmed out due to an empty hopper.
mation.
3. Install user inter-
face per instruc-
tions.
4. Plug in the ap-
pliance
blower will run for
about 45 seconds,
wait for it to stop
before moving to
manual feed)
8:30 AM
ON
MANUAL FEED
Set Temperature
STANDBY
STANDBY
65
65
72
48
March 19, 2018
7082-154E
TREKKER INSERT
HEATING
65
72
(exhaust
.
7