ROA 128 5151
PIM Evaluation Board
5
5.1
Address and Voltage Pin-strap Resistors
This section describes the locations of the address and voltage pin-strap resistors
and the resistors for hold up and +OUT2 voltage adjustments. For exact resistor
values see the technical specification for the PIM product.
Address pin-strap resistors
Figure 5 shows the positions of the address pin-strap resistors for the different
PIM products. R2 and R3 are positions of the address pin-strap resistors for
PIM 4820. R29 is the position of the address pin-strap resistors for
PIM 4328.
Figure 5. Positions of the address pin-strap resistors.
User Guide
1/28701-ROA 128 5151 Rev A
© Flex
a
11
May 2018