Pmbus/Usb Adaptors; Connection Of Flex Power Kep 910 17 Pmbus-To-Usb Adaptor - Flex ROA 128 5151 User Manual

ROA 128 5151
PIM Evaluation Board
3
3.1

PMBus/USB Adaptors

The Flex Power KEP 910 17 PMBus-to-USB adaptor is used to connect the
PIM board to a PC.
Connection of Flex Power KEP 910 17 PMBus-to-
USB adaptor
Connect the Flex Power KEP 910 17 PMBus-to-USB adaptor as shown in Figure
3. Connector is found on reverse side of the ROA 128 5151 board (see 8a,
Figure 1).
Figure 3. Connection of the Flex Power KEP 910 17 PMBus-to-USB adaptor.
User Guide
1/28701-ROA 128 5151 Rev A
© Flex
8
May 2018