Flex ROA 128 5151 User Manual page 6

ROA 128 5151
PIM Evaluation Board
11 The PIM Evaluation board is equipped with a 3x470µF capacitance.
Along with the Board, as a side-part, a 3300µF capacitor is included in
the kit. It is up to the user to un-mount and/or mount the capacitance
actually needed. For information about hold-up capacitance
recommendations, please see the technical specification for the PIM
product.
When connecting the 3300µF capacitor attach "-"connector of the
capacitor (see a, Figure 2) to the "-" connection of the board (see b,
Figure 2). Soldering is required.
a
Figure 2. Connection of the Hold Up capacitor.
User Guide
1/28701-ROA 128 5151 Rev A
© Flex
b
6
May 2018