Change Of Series Resistors For The Leds; Change Of Led Series Resistors R3 And R4 In Position 0X2B - Flex BMR456 User Manual

5

Change of series resistors for the LEDs

In order to reduce power dissipation, the series resistors for the LEDs can be
changed to higher values. The resistors are located at the places shown in
the figure below.
Figure 5.1: Series resistors for the LEDs
5.1

Change of LED series resistors R3 and R4 in position 0x2B

The figure below shows where LED series resistors R3 and R4 are located
Figure 5.2: Resistors R3 and R4
User guide evaluation board BMR45x 2023-12-05 11 (14)