Advertisement
Wiring Diagram
CAT5 Cable:
maximum 328 ft.
(100 m)
Ethernet
Ethernet speed
link/
On = 100 Mbit/sec
activity
Off = 10 Mbit/sec
RJ45 jack: Ethernet link
(to PC or A/V equipment)
Configuration
One SZ-CI-PRG control interface may be used per
system. The SZ-CI-PRG must be configured as a part
of the system using the Stanza
Operation
The SZ-CI-PRG receives its operating settings via a
device database transfer during system startup.
Diagnostic LED Feedback
THE SZ-CI-PRG provides 5 LEDs for user feedback
(LEDs 6 and 7 are unused):
Power LED
LED 1 lights when the unit is powered.
Ethernet Link LED
LED 2 will light when an active Ethernet link is
detected, and flash when there is link activity.
RF Activity LED
LED 3 will blink when the SZ-CI-PRG receives or
transmits an RF packet.
RS232 Link LEDs
LEDs 4 (transmit) and 5 (receive) will blink when the
RS232 link is active.
Ethernet Settings
The SZ-CI-PRG uses DHCP by default and can be
2
SZ-CI-PRG Control Interface Installation and Operation
To PC or AV equipment. For Ethernet link, use CAT5 cable (not included) to connect to
auxiliary equipment. Additional Ethernet network equipment and cables provided by others.
RS232 Cable:
maximum 50 ft.
(15 m)
To PC or AV equipment: Use a standard DB9 cable
COM
(not included), or follow the chart below.
RS232 Pin Connect Wiring
TxD
SZ-CI-PRG
Interface
Common
RxD
Receive
Transmit
PELV (Class 2: USA) Power in
200 mA 15 - 24 V
(powered by 120 V
PC software tool.
TM
Typical PC or
A/V equipmen
Com
TxD
RxD
60 Hz transformer, included).
communicated with using a Telnet client on port 23.
The default user login name is "lutron" and the default
password is "integration". Login name and password
are case-sensitive. The Lutron Device IP program can
be used to change the default IP address and port
and change from DCHP to static addressing.
Internet: www.lutron.com/stanza
e-mail: product@lutron.com
Technical support: USA, Canada, Caribbean: 1.800.523.9466
Mexico: +1.888.235.2910
Central/South America: +1.610.282.6701
Warranty: 1-year limited warranty standard. 2-year parts and labor warranty, with
8-year pro-rated parts replacement on systems that include factory startup.
For complete warranty details, see the Start-Up/Warranty document provided with
your Stanza system specification submittal information.
These products may be covered under one or more of the following U.S. patents:
5,838,226; 5,848,054; 5,905,442; 6,687,487; 6,803,728; and corresponding foreign
patents. U.S. and foreign patents pending. Lutron and the sunburst logo are
registered trademarks and Stanza is a trademark of Lutron Electronics Co., Inc.
© 2008 Lutron Electronics Co., Inc.
Lutron Electronics Co., Inc.
Made and printed in U.S.A. 12/18/08
P/N 040244 Rev. A
Antenna
PGM
button
Diagnostic
(not used)
LEDs
1 2 3 4 5 6 7
LED 1: Power
LED 2: Ethernet link
LED 3: RF activity
LED 4: RS232 link TX
LED 5: RS232 link RX
LED 6: Unused
LED 7: Unused
R
Advertisement
