Technical Specifications - LEGRAND DAKER DK Plus 3 101 71 Installation Manual

General characteristics
Nominal power (VA)
Active Power (W)
Technology
Waveform
Bypass
Input characteristics
Connection
Rated voltage
Range of voltage
Rated frequency
Maximum current
Total harmonic distortion of
the current
Power factor
Number of phases
Output characteristics
Outlets
Rated voltage
Rated frequency
Crest factor
Total harmonic distortion of
the voltage
Efficiency
Overload capacity
Number of phases
Batteries and battery charger characteristics
Number of batteries
Battery type
Unitary capacity
60
3 101 70
1000
900
on-line, double conversion, VFI-SS-111
internal automatic bypass
external maintenance bypass (optional)
10 A,
IEC 320-C14
from 160 V to 288 V at full load
6,8 A
THDi < 7% at full linear load and normal voltage
≥ 0.99 (with full linear load)
(6) 10 A,
IEC 320-C13
adjustable to 200/208/220/230/240 V
< 3% at full linear load
< 7% at full non-linear load
up to 90%
3
Lead-acid sealed without maintenance (VRLA)
12 Vdc - 7.2 Ah

7 Technical specifications

3 101 71
2000
1800
sinusoidal
10 A,
IEC 320-C14
230 V
50 / 60 Hz ± 5 %
13,6 A
Single phase
(6) 10 A,
IEC 320-C13
230 V ± 1%
50 / 60 Hz ± 0,1%
3:1
up to 91%
105% continuous
120% for 30 seconds
150% for 10 seconds
Single phase
6
12 Vdc - 7.2 Ah
3 101 72
3000
2700
16 A,
IEC 320-C20
20,0 A
(6) 10A,
IEC 320-C13
+
(1) 16A
IEC 320-C19
up to 92%
6
12 Vdc - 9 Ah