Sharp DX-AT50 Operation Manual page 57

" AV Control Unit
Dimensions Width: 8-1/2" (215 mm)
Height: 2-5/16" (58 mm)
Depth: 10-5/16" (261 mm)
Weight 2.9 lbs. (1.3 kg)
Audio input terminals Digital input (Optical) 1
Digital input (coaxial) 1
Analogue input (RCA type) 8 (L/R)
Audio output terminal Headphones: 16 - 50 ohms (recommended: 32 ohms)
Other terminals System control 3
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
" Subwoofer/Amplifier Unit
Power source AC 120 V, 60 Hz
Power consumption 80 W
Dimensions Width: 10-1/4" (260 mm)
Height: 14-11/16" (373 mm)
Depth: 16-5/8" (421 mm)
Weight 21.8 lbs. (9.9 kg)
Power output (FTC) 40 watts minimum RMS per channel into 4 ohms from 20
Hz to 20 kHz, 1 % total harmonic distortion
Rated power output Front: 50 W + 50 W, Center: 50 W,
Surround: 50 W + 50 W (4 ohms at 1 kHz)
Subwoofer: 50 W (4 ohms at 100 Hz)
Amplification system 64fs 1-bit switching (Remarks: fs = 44.1 kHz)
A/D noise shaping 7th-order
Terminals Front speakers, Center speaker, Surround speakers: 4
ohms
System control 2
Subwoofer Type
Maximum input power 100 W
Rated input power
Impedance
(delta - sigma) modulation
4-3/4" (12 cm) woofer (Magnetic
shield)
50 W
4 ohms
" Front/Center/Surround speakers
Type Full range speaker system (Magnetic shield)
3-1/8" (8 cm) speaker
Maximum input power 100 W
Rated input power 50 W
Impedance 4 ohms
Dimensions Width: 3-3/4" (95 mm)
Height: 4-1/2" (114 mm)
Depth: 4-1/8" (104 mm)
Weight 1.5 lbs. (0.7 kg)/each
SD-AT50
DX-AT50
ENGLISH
E-52