Advertisement
Quick Links
Download this manual
See also:
Operating Manual
MODEL
HT-SL72 / HT-SL77
SOUND BAR HOME THEATER SYSTEM
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP product.
HT-SL72 and HT-SL77 Sound Bar Home Theater system consisting of TX-BOX, Sound Bar and Subwoofer.
Notes:
●
This product is recommended for flat panel TV (LCD and plasma).
●
For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.
●
This product is controlled via HDMI CEC (Consumer Electronics Control) specification, therefore
for HDMI connection, your TV's CEC must be enabled. For detail, refer to the operation manual of the TV.
●
For TV without HDMI CEC, headphone or RCA analogue connection is available.
●
For TV without HDMI, headphone or RCA connection is required.
●
This unit supports HDMI which enables Audio Return Channel (ARC).
Recommended Connection:
TV Type
CEC FUNCTION
HDMI
MUST BE ENABLED
( with ARC)
with HDMI
MUST BE ENABLED
HDMI TV without
CEC & ARC or non
HDMI TV
TINSZB271AWZZ
HT-SL72_77_Front ZB271EN.fm
OPERATION MANUAL
CONNECTION
HDMI IN
(ARC)
HDMI IN
HEADPHONE OUT
NONE
RCA
ENGLISH
CONNECTION METHOD
Page 11, Method 1
Page 11, Method 2
Page 12, Method 1
Page 12, Method 2
Printed in Malaysia
12B R KI 1
2012January30
Advertisement
Related Manuals for Sharp HT-SL72
Summary of Contents for Sharp HT-SL72
-
Page 1: Operation Manual
SOUND BAR HOME THEATER SYSTEM OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. HT-SL72 and HT-SL77 Sound Bar Home Theater system consisting of TX-BOX, Sound Bar and Subwoofer. - Page 2 TX-BOX Stand x 2 Screw for Brackets Angle x 2 (TCAUHA028AWZZ) For HT-SL77 only: (GITAUA012AW01) (GITAUA021AWSA) (LANGKA225AW01) (QCNWHA046AW01) (XEBY830P08000) For HT-SL72 only: (QCNWHA043AW01) Sound Bar Stand Cushion x 2 (PCUSSA190AWZZ) HT-SL77 only HT-SL77 only HT-SL77 only HT-SL77 only Sound Bar Cover Joint...
- Page 3 Place of purchase ............ENERGY STAR ® is a U.S. registered mark. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 2012 January 31 HT-SL72 / HT-SL77 ZBxxx...
- Page 4 When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer. 2012 January 31 HT-SL72 / HT-SL77...
- Page 5 Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.
- Page 6 SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.
- Page 7 3. Woofer 6. AC Power Cord ......10 2012 January 31 HT-SL72 / HT-SL77 ZBxxx...
- Page 8 2. Slot in the sound bar into the sound bar stand and fix its slot in the sound bar joint and its cover as below. cover as shown. Right Left Front side of the sound bar 2012 January 31 HT-SL72 / HT-SL77...
- Page 9 BOX once it is attached on the wall as it can cause damage and injury. Driving screws SHARP designed the sound bar and TX-BOX so you may Slot in the wire inside the hang them on the wall. Use proper screws (not supplied).
- Page 10 Safety wires (not supplied) are useful to prevent the sound bar from falling off the table. Wall surface Loop the safety wires (not supplied) into each hole as shown and tie the safety wires to the LCD TV stand. 2012 January 31 HT-SL72 / HT-SL77...
- Page 11 Do not allow any objects to fall into or INCORRECT to be placed in the bass reflex duct. ● Do not stand or sit on the subwoofer/sound bar. You may be injured. E-10 2012 January 31 HT-SL72 / HT-SL77 ZBxxx...
- Page 12 For details, refer to the operation manual of the TV. ● If you are unable to select external speaker setting from the TV menu (E.g. For Sharp LCD TV, it is named as AQUOS AUDIO SP), turn the CEC OFF and ON again.
- Page 13 To control the volume via TV unit, some setting in the TV MENU is needed. For details refer to the operation manual of the TV. Example: Go to the Setting Menu of the TV, select AUDIO OUT and choose VARIABLE. However, the volume can be controlled by adjusting GAIN knob on the TX-BOX. E-12 2012 January 31 HT-SL72 / HT-SL77 ZBxxx...
-
Page 14: Connecting The Wireless Subwoofer
“AQUOS speaker is enabled” message will be ● To get the optimum listening performance, make sure displayed if SHARP LCD TV does not detect HT-SL77 the area around the sound bar and wireless subwoofer during power on. However the message “AQUOS audio is clear of any obstacles. -
Page 15: Factory Reset
● ● Wireless connection Check the distance If something is wrong with this product, check the following before calling your authorized SHARP dealer or service cannot be between the TX-BOX and center. established Subwoofer (32 feet). - Page 16 Specifications As part of our policy of continuous improvement, SHARP Soundbar speaker reserves the right to make design and specification changes for product improvement without prior notice. The Type performance specification figures indicated are nominal Full Range speaker system values of production unit. There maybe some deviations 7/8"...
Need help?
Do you have a question about the HT-SL72 and is the answer not in the manual?
Questions and answers