Mp3 Disc Operation; Mp3 Disc Playback - Sharp DX-AT50 Operation Manual

MP3 disc operation

SD-AT50
DX-AT50
ENGLISH
[Front]

" MP3 disc playback

You can play back CD-R/RW recorded in the MP3 format.
1
Load a disc containing MP3 tracks.
A menu screen appears.
2
Press the , ,
CD button.
Pressing the TOP MENU button goes back to the uppermost layer.
E-33
VOLUME LABEL
FIRST PLAY
+ALBUM01
+ALBUM02
+ALBUM03
+ALBUM04
SELECT: ENTER:
RETURN: START: PLAY
or button to select a track and press the DVD/
Direct play
1 Press the DIRECT button.
2 Press the , , or button to select a track and press the DVD/CD
Programmed play
1 While in the stop mode, press the MODE button.
2 Press the or button to select an album and press the ENTER button.
3 Press the or button to select a track and press the ENTER button.
Press the button to return to the album selection screen.
4 After programming is completed, press the DVD/CD
Caution:
If you convert MP3 data to "audio CD" data when recording on a CD-R/RW, operate
it as an audio CD. The MP3 operation is impossible.
Notes:
! "+" appears in front of the album name.
! Maximum of 14 characters can be displayed for an album name, and 25 charac-
ters for a track name. Underline, asterisk, and space may not be displayed.
! The system can recognize total of 255 albums and tracks.
! The 9th or later layers cannot be played back.
! You can select a track for direct playback using direct buttons when the screen
display is turned off.
! The screen displays up to 5 tracks for the programmed play. If more tracks are
entered, the next screen appears. Press the
! If you enter a wrong track, press the CLEAR button.
! To stop the programmed play, press the DVD/CD
button.
button.
or button to switch the screen.
button twice.