Connecting The Satellite Speakers - Sharp DX-AT50 Operation Manual

Front speaker Center speaker
(Right)
Red
Black Black
Red
White
Red
Gray
Black
Red
Gray
Surround speaker
(Right)
All satellite speakers provide the same performance.
Their positions can be exchanged with one another.
Front speaker
(Left)
Red Red
Black
White
Green
Green
Subwoofer/
Amplifier unit
Blue
Black
Red
Blue
Surround speaker
(Left)

" Connecting the satellite speakers

Insert the speaker plugs to the subwoofer/amplifier unit according to the color coding.
Connect the speaker cords to the satellite speakers first and then to the subwoofer/
amplifier unit.
(Satellite speaker)
Speaker terminals
Red
Tube
Black
Caution:
! Make sure to connect the speakers after unplugging the DVD player and the
subwoofer/amplifier unit.
! Insert the speaker plug fully with the rising side facing to the left.
! Hold the speaker plug when removing it from the subwoofer/amplifier unit. Pulling
the cord may cause malfunction to the subwoofer/amplifier unit.
! Do not mistake the
and , and right and left terminals of the speaker cords. (The
right speaker is placed on the right when you face the system. See page 16.)
! Never short-circuit the speaker cords. If the
speaker cords are short-circuited, the protec-
tion circuit is activated and the power is turned
off. In such a case, check that the cords are
properly connected before turning the power
on again.
! Only the supplied speakers should be used with this product.
! Do not stand or sit on the speakers. You may be injured.
Binding cords:
Tie the cords connected to the subwoofer/amplifier unit with a cord holder.
Cord holder
(Subwoofer/amplifier unit)
Label
Speaker Plug
Plug in with the rising
side facing to the left.
SD-AT50
DX-AT50
ENGLISH
E-12