Playing A Disc - Sharp DX-AT50 Operation Manual

Playing a disc

SD-AT50
DX-AT50
ENGLISH
Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2" etc. accord-
ingly.
[Front]
E-27
1
Press the ON/STAND-BY button to
turn the power on.
The startup screen appears.
2
Press the FUNCTION button to set the input to "DVD".
! Select "DVD" when playing a audio CD.
! The same operation can be performed by pressing the DVD/CD
the remote control.
3
Press the button to open the disc tray.
Data side
Disc tray
! Place the disc on the disc tray, label side up.
! If the display window of the DVD player is placed on the lower side, a disc may
fall or may not be ejected.
4
Press the button to close the disc tray.
If the disc you are using supports auto start, it starts playing automatically (even
if you do not press the button), as soon as you close the disc tray.
5
If you cannot start playback in step 4, press the
This can be operated by pressing the DVD/CD
Note:
When the DVD player is turned on or the input source is switched to "DVD", no oper-
ation will be accepted for 5 seconds as the DVD player is proceeding the initial set-
ting.
button on
Data side
Slide the disc into the hooks.
(An 3" (8 cm) disc cannot be played.)
button.
button on the remote control.