Setting The Sleep Timer - Sharp DX-AT50 Operation Manual

1-bit digital home theater
Table of Contents

Advertisement

Timer and sleep operation (continued)
SD-AT50
DX-AT50
ENGLISH

" Setting the sleep timer

You can set the system to the power stand-by mode at the specified time.
1
While the disc is playing, press the TIMER but-
ton.
2
Within 10 seconds, press the
select "SLEEP SET", and press the ENTER
button.
3
Press the
or
(Maximum: 2 hours - Minimum: 1 minute)
! 2 hours - 5 minutes
! 5 minutes - 1 minute
4
Press the ENTER button.
The sleep timer indicator lights up and playback begins.
5
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
You cannot change the volume.
Caution:
This system cannot set the sleep timer of other equipment.
When setting the sleep timer using the digital tuner, TV, or VCR, the connected
equipment should be set to sleep timer at the same time.
E-45
or
button to
button to select set the time.
5-minute intervals
1-minute intervals
To confirm the remaining sleep time:
1 While "SLEEP" is indicated, press the TIMER button.
2 Within 10 seconds, press the
or
! The remaining sleep time is displayed for about 10 seconds.
! You can change the remaining sleep time while it is displayed by pressing the
ENTER button (steps 3 - 4).
To cancel the sleep operation:
Sleep operation is canceled by turning the power on while "SLEEP" is indicated. The
same operation can be performed in the following procedure without turning the
power on.
1 Press the TIMER button.
2 Within 10 seconds, press the
or
ENTER button.
" To use timer and sleep operation together
You can fall asleep and wake up to the same CD.
1
Set the sleep timer (steps 1 - 4).
Sleep operation starts.
2
Set the timer playback.
(Setting the timer on page 43, steps 1 - 7)
Sleep timer setting
Timer playback setting
1 minute - 2 hours
1minute - 2hours
Sleep operation will
automatically stop
button to select "SLEEP".
Remaining sleep time
button to select "SLEEP OFF", and press the
Timer playback start
Desired time
Finish time

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sd-at50Sd-at50dvSy-sat50dv

Table of Contents