System Overview - Dynacord DPC 8000 Manual

DPC 8000
3

System overview

The PROMATRIX 8000 system includes the DPC 8015 call station and the DPC 8120 call
station extension. The call station is equipped with a goose neck microphone, and has 15
customizable selection and function buttons and five pre-programmed menu/function buttons.
Up to three alarm buttons or key switches can also be retrofitted. The call station is equipped
with an illuminated LC display (122 x 32 pixels). The call station has the following features:
•
•
•
•
•
•
•
•
•
•
•
•
•
The call station is processor-controlled, and equipped with extensive monitoring functions. A
watchdog circuit is built in to monitor the processor system. The internal microphone can be
monitored for function, interruptions, and short-circuits. Line monitoring for the CAN bus and
for audio transmission allows line interruptions and short-circuits to be detected and
indicated to the user. The call stations for the PROMATRIX 8000 system can be configured
quickly and easily using IRIS-Net. A graphical and conversational user interface allows the user
to define all button functions, priorities, options, and other properties.
Microphone with preamplifier and compressor/limiter switch
Function and selection buttons with programmable button assignment
Simple labeling of buttons with labeling strips and format template (file in .doc format
included in the IRIS-Net scope of delivery)
Possible to install covered alarm buttons or key switches (optional, three installation
slots)
Possible to connect an external microphone or audio source
Built-in loudspeaker
High-resolution LC display
Comprehensive parameter settings menu on the actual call station
Microphone and line monitoring
Error message via LED and buzzer, and error text in the LC display
Processor control of all functions
Monitoring of the processor system via watchdog circuit
Non-volatile FLASH memory for configuration data
System overview | en 7
28-Feb-2013 | |