Table of Contents
Advertisement
DPC 8000
Parameters
Button
assignment
Special functions
Warning!
If several call stations need to be operated via a DPM 8016, each call station must be as-
!
signed a unique CAN address (1–16). Subsequently changing the CAN address causes the
configuration to change.
5.4
Button labeling
The call station buttons are labeled using labeling strips, which are inserted from above. To
label a row of buttons, loosen the respective cover on the left-hand side using a suitable
slotted screwdriver. Insert the labeled strip into the open label field, and close the label field
by evenly pressing down on the cover.
5.5
Retrofit options
The DPC 8015 call station can be retrofitted with a maximum of three covered buttons (EB
DPC, item F01U101089) or key switches (NRS90231, item F01U101000). Additional control
elements can be used, for example for triggering alarms in certain areas (selection alarm) or
for switching the system ON/OFF. The functions are assigned via IRIS-Net during
configuration.
5.5.1
Alarm button (EB DPC)
The EB DPC is an optional button for installation in the DPC 8000 series call stations. The
transparent cover cap prevents unintentional actuation of the button. A high-efficiency LED is
integrated for optical visualization, while also ensuring maximum operational reliability. The
button feed lines are monitored by the call station. If an error occurs, this is indicated in the
error log of the PROMATRIX 8000 system.
Figure 5.5: EB DPC
Key switch
External microphone
Selection buttons 1–n
↵
↑
↓
ESC
DEL
Setting/description
Not configured
Not configured
Selection of circuits 1 through n (button 1 = circuit
1, button 2 = circuit 2 etc.)
Call in selected circuits, priority 5
Switches system on/off, priority 5
Stops a live audio signal.
Acknowledges and advances to next error message
Selects all-call/deletes call pattern
Not configured
Installation | en
13
28-Feb-2013 | |
Advertisement
Table of Contents
