Operation; Indicators - Dynacord DPC 8000 Manual

24 en | Operation
8

Operation

8.1

Indicators

The meanings of the call station LED indicators are summarized below. Standard configuration
of the call station is assumed.
LED
Zone (green)
Zone (yellow)
↑
↓
DEL
↵
28-Feb-2013 | |
Status
Off
Illuminated green
Off
Flashing yellow
Illuminated yellow
Off
Illuminated green
Flashing green
Off
Illuminated green
Off
Illuminated green
Off
Illuminated green while the
speaker button is pressed
Green, flashing slowly
Description
Circuit or group not selected
• Circuit or group selected
• Special function activated
• Direct call activated
Circuit or group not assigned
Circuit or group assigned (alarm or
evacuation)
• Announcement mode: Circuit or group
assigned (everything except alarm,
evacuation, or background music)
• Program assignment mode: Circuit or
group cannot be assigned with
background music
System is switched off (standby)
System is switched on and ready for
operation
System has been switched on and is
booting up (activation process)
Pressing the button does not do anything –
the action cannot be stopped
Pressing the button ends an event that has
already started
No all-call selected
All-call pre-selection
The selected circuits are free and a call can
be made
The announcement is being transmitted
A call station with lower priority is currently
transmitting an announcement in at least
one selected circuit – this announcement
can be interrupted at the cost of the
currently active call station
DPC 8000