Setup Menu - Dynacord DPC 8000 Manual

22 en | Configuration
Buzzer
The built-in loudspeaker can be programmed as an acoustic warning signal. The signal tone
sounds in the event of incorrect operation or malfunction, or as a warning. Pressing the ↵
button takes the user to the Buzzer submenu. The current setting of the buzzer ("on" or "off")
is displayed. Pressing the ↑ or ↓ buttons toggles between these two statuses. Pressing the ↵
button accepts the setting selected, and returns the user to the User menu.
Notice!
i
This menu option requires a password.
Date/time
The date and time can be set for the PROMATRIX 8000 system on the call stations. Pressing
the ↵ button takes the user to the Date/Time submenu. Pressing the ↑ or ↓ button toggles
between the day, month, year, hours, minutes, and seconds. Use the 0–9 buttons on the call
station to input entries. Pressing the ↵ button accepts the setting selected, and returns the
user to the User menu.
LCD contrast
Pressing the ↵ button takes the user to the LCD Contrast dialog box. In this dialog box, the
LCD contrast can be adjusted to the viewing angle by pressing the ↑ or ↓ button. This helps
achieve maximum readability for the respective position. Pressing the ↵ button accepts the
contrast setting selected, and returns the user to the User menu.
LCD brightness
Pressing the ↵ button takes the user to the LCD Brightness dialog box. In this dialog box, the
display brightness can be adjusted by pressing the ↑ or ↓ button. Pressing the ↵ button
accepts the brightness selected, and returns the user to the User menu.
LED test
Pressing the ↵ button activates the LED test for the call station and all connected call station
extensions. All LEDs flash during this test. Pressing the ↵ button deactivates the LED test, and
returns the user to the User menu.
Password input
Notice!
i
The default password for activation of the Setup Menu and Buzzer menu items is 2222
Pressing the ↵ button takes the user to the Password dialog box. Use the 0–9 buttons on the
call station to input entries. Passwords are used to activate call station options.

Setup menu

Pressing the ↵ button takes the user to the Setup menu. The entries in this submenu are
described in section Setup menu, page 22 . If the Setup Menu menu option is not visible, it
must be activated via the Password menu item.
7.2 Setup menu
The Setup menu is accessed via the Setup Menu entry in the User menu. If this menu option is
not visible, it must be activated via the Password menu option.
28-Feb-2013 | |
DPC 8000