Table of Contents
Advertisement
DPC 8000
Figure 11.2: DPC 8120
Assembly
See the following information regarding installation of call station extension DPC 8120 on call
station DPC 8015.
1.
2.
3.
4.
5.
Notice!
i
When using several call station extensions, these must be assigned addresses in ascending
order from left to right (1–5).
6.
7.
Disconnect the call station from all connectors
Align the call station and call station extension next to each other with the top sides
facing down (the following diagram shows how to install two DPC 8120s to a DPC 8015)
Mount the connecting plate (1) and connecting holder (2) with 4 and 2 screws
respectively
Insert connecting cable (3) into the EXT socket of the call station or call station extension
(the connector will click into place)
Set a unique address for the call station extension via the DIP switch EXTENSION
ADDRESS (4)
Re-connect the call station connections
Configure the call station extension using the IRIS-Net software
Appendix | en
35
28-Feb-2013 | |
Advertisement
Table of Contents
