Key Strokes For Terminal Emulation Software; Setting The Df1 Address - Allen-Bradley 1203-SSS User Manual

Key Strokes for Terminal Emulation Software

Key Description
0 – 9 In the main menu, keys 1 – 3 select a menu option.
In the parameter screen, keys 0– 9 enter a value.
Esc Display the main menu or abort changes to a parameter.
↑ or ↓
Scroll through parameters or events.
→ or ←
Scroll through the values for a parameter.
Enter Save a value for a parameter.

Setting the DF1 Address

The DF1 address is the address that the converter is using on the serial
network. If you have multiple nodes on a serial network, each node
needs a unique DF1 address. The factory-default DF1 address is 1.
To set the DF-1 address
1. In the main menu
2. Press ↑ or ↓ to scroll to P2 - [DF1 Address].
Figure 3.7 DF1 Address Parameter
Press the UP ARROW or DOWN ARROW key to scroll
through the parameter list. Press the LEFT ARROW or
RIGHT ARROW key to modify parameter values. Press
the ENTER key to save a new value.
2> DF1 Address = 1
3. Press → or ← to scroll to the desired value, and then press Enter.
4. Reset the converter. Refer to
Configuring the Serial Converter
(Figure 3.6), press 1 to display the parameters.
Resetting the Converter
3-7
in this chapter.