8. Select the settings shown in
Important: If you have previously set P3-[Serial Port Rate] to
19.2K or 38.4K, select that value in the Bits per second
box.
Figure 3.4 Properties Dialog Box
9. Click OK. A blank HyperTerminal workspace appears.
10. Select File > Properties to display the Properties dialog box.
11. Click the Settings tab. See
12. Under Function, arrow, and ctrl keys act as, select Terminal keys.
13. In the Emulation box, select VT100.
Configuring the Serial Converter
Figure
3.4.
Figure
3.5.
3-5
S004