Table of Contents
Advertisement
3-6
Configuring the Serial Converter
Figure 3.5 Properties Dialog Box
14. Click OK to display the HyperTerminal workspace.
TIP: Select File > Save to save the HyperTerminal configuration that
you just created. In future connections, you can select the saved
configuration and quickly connect to the converter.
15. Press the Enter key until the main menu appears.
Figure 3.6 Main Menu
Main Menu - Enter Number for Selection
1> Display Setup Parameters
2> Display Event Queue
3> Update FLASH Program
What do you want to do?
Set up terminal emulation software
Edit the DF1 address, serial port rate, or fault action
View the event queue
View DF1 data
Update the firmware
S005
Page
3-3
3-7
through
3-9
4-3
4-4
C-1
Advertisement
Table of Contents
Troubleshooting
