HP 8712ET User Manual Supplement page 56

NOTE
Measurement Setup and Control with Fast Recall
Using Fast Recall with the Front Panel or a Keyboard
9. The fast-recall mode will remain on (even when the analyzer is
) until manually turned off.
PRESET
10. With the fast-recall feature turned on, you will always be only one or
two key presses away from recalling an instrument state.
11. With an external keyboard connected to the rear panel DIN
connector, keys F1 through F7 are equivalent to pressing softkeys 1
through 7 on the analyzer. See "Using a Keyboard" in Chapter 4 of
your analyzer's User's Guide for information on connecting and using
an external keyboard.
For test systems that include a multiport test set:
See the example program titled "MPSVRCL." This IBASIC/RMB
program requires an HP 8712ET/ES or HP 8714ET/ES analyzer
connected to a multiport test set. The program saves three instrument
states, each measuring various ports in ALT sweep mode. Fast recall is
enabled so that subsequent recalls require a single keypress.
Example programs can be found in the following four locations:
• Web site http://www.hp.com or http://www.agilent.com. Use the
search function to find Web pages related to 8712 example programs.
• Example Programs Disk, HP 8712ET/ES and HP 8714ET/ES (DOS
format): HP part number 08714-10003
• Example Programs Disk, HP 8712ET/ES and HP 8714ET/ES (LIF
format): HP part number 08714-10004
• Example Programs Guide, HP 8712ET/ES and HP 8714ET/ES: HP
part number 08714-90016
4-4 Automating Measurements