Saving The Measurement To Disk - Save Data - HP 8712ET User Manual Supplement

Saving Measurement Results
Saving the Measurement to Disk — Save Data
Saving the Measurement to Disk — Save
Data
Save ASCII
Similar to , the analyzer can also save the measurement
data onto disk as an instrument state file. Use Define Save , and turn
Data ON and turn Inst State and Cal OFF.
A file saved in this manner is smaller than a file saved using
NOTE
Save ASCII . Save Data uses 6 bytes per point, as opposed to about
20 bytes per point for Save ASCII . However, the file type is binary, and
contains a header, making it difficult to read.
Automating Measurements 8-5