Seat Support Removal; Shuttle 2 Rear Body - Cushman Shuttle 2 Service Manual

Read all of Section B and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
The latch tab for the bed is to be mounted so that the arm
is toward the inside of the vehicle.
To be properly adjusted, the rear edge of the latch tab,
when mounted under the driver side seat back adjustable
bumper bracket, will align with the rear edge of the
bracket. Check latch tab adjustment to ensure latch
Seat Frame
Seat Support

Seat Support Removal

Tool List
3/8" Drill ....................................................................... 1
3/16" Drill Bit................................................................ 1
Rivet Gun .................................................................... 1
Torque Wrench, ft lbs .................................................. 1
Phillips Bit.................................................................... 1
Side Panel
Fig. 5 Shuttle 2 Rear Body
Qty.
Repair and Service Manual
assembly fully engages tab when in locked position.
Adjust as necessary by moving tab to the front or back to
allow full engagement of latch assembly on tab.

SHUTTLE 2 REAR BODY

Seat Filler Pan
Cargo Filler Pan
Mid Support
Battery Rack
Rear Fender
Phillips Screwdriver .....................................................1
Open End Wrench, 7/16" .............................................1
Open End Wrench, 7/8" ...............................................1
To prevent inadvertent movement that could
BODY
Load Bed
Bed Frame
Rear Valance
B
B
Page C-9