Remote Control Unit - Sharp LC-M3700 Operation Manual

I Generally the monitor is operated using the remote control unit once main POWER on the
back of the monitor has been turned on.
STANDBY/ON
INPUT VOL
RETURN MENU
ENTER
ENLARGE WIDE
LCD MONITOR
INPUT (Input selection)
Press INPUT to display the input selection screen. Press INPUT or
use / (Cursor control) to select the input mode.
' "
» In INPUT1 or PC mode, the video selected in "Input Select"
(page 54) is displayed on the screen.
» INPUT2 can be selected only when it has been set to "Input" in
"INPUT2 Select" (see page 56).
INPUT1
VOL (Volume adjustment)
Press to increase the volume, and
volume.
Sound is muted when volume is set to "0".
Each input terminal has its own volume output setting.
ENLARGE
The display toggles as shown below, based on the setting on the
menu screen.
Off
56 61
Enlarge
WIDE (Screen size selection)
Press WIDE to display the "Wide Mode" menu screen. Press WIDE
or use ' / " (Cursor control) to select the screen size.
The screen sizes which can be selected vary depending on the
type of video signal.
57 62

Remote Control Unit

INPUT2 INPUT3
2 × 2
PC
to decrease the
3 × 3
31
US