Pc Operation; Pc Connection; Communication Conditions - Sharp LC-M3700 Operation Manual

PC connection

One-to-one connection with a PC .......
1
Connect with RS-232C cross cable between the PC COM port (RS-232C connector) and the RS-
232C INPUT terminal on the back of monitor.
"Rear view
Daisy chain connection from a single PC .......
2
Connect with RS-232C cross cable between the PC COM port (RS-232C connector) and the RS-
232C INPUT terminal on the back of monitor.
Next, connect RS-232C cross cable to the first monitor's RS-232C OUTPUT terminal and to second
monitor's RS-232C INPUT terminal. Connect in the same way to the third and subsequent monitors.
Up to about 20 monitors can be connected, depending on the length of RS-232C cables and
installation environment.
"PC
RS-232C
cross cable
To COM port

Communication conditions

I Set the RS-232C communication settings on the PC to match the monitor's communication settings.
Baud rate: 9,600 bps
Data length: 8 bits
Parity bit: None
"First monitor
To RS-232C
INPUT terminal
Stop bit:
Flow control:
Basic operation
To RS-232C
INPUT terminal
RS-232C cross cable
Advanced operation
"Second monitor
RS-232C
cross cable
To RS-232C
INPUT terminal
To RS-232C
OUTPUT terminal
1 bit
None

PC Operation

"PC
To COM port
To RS-232C
OUTPUT terminal
37
US