Tray-Exchange-Window Ng; Upper Side Of Pallet Ng - Panasonic KXF-3V3C Operating Instructions Manual

MAINTENANCE (Multi-tray Feeder)
2-6-6 Tray-exchange-window
◊ The multi-tray feeder without shutter
Cause
• Some foreign bodies on the tray exchange part are detected by tray exchange for light
emitting and receiving from the left and light of tray exchange part.
◊ The multi-tray feeder with shutter
• This is not used. (However, I/O is available)
◊ Remove the foreign bodies after tray exchange.
Action
◊ If there is no trouble, check the optical axis and its work.
2-6-7 Upper Side of Pallet
◊ The tray exchange part without cover
Cause
• Some foreign bodies on the tray exchange part are detected by the tray interruption sensor
for light emitting and receiving, from the right and left of tray exchange part.
◊ The tray exchange part with cover
• The error is detected by the cover switch of tray exchange part.
◊ Remove the foreign bodies after tray exchange.
Action
◊ Make sure of closing the cover of tray exchange part (supply side).
3V3C-E-MMD02-A04-00
MT10F-SL : 5088h bit 5
MT20F-SL : 5084h bit 5
MT10F-SL : 5089h bit 0 to 2
MT20F-SL : 5084h bit 7
5084h bit 7
Section 2 ERROR MESSAGES
NG
NG
2
Page 2-83