Ordering Information 7Ve61 - Siemens SIPROTEC 4 7VE61 Manual

Ordering Information and Accessories
A.1 Ordering Information 7VE61
A.1

Ordering Information 7VE61

Multifunctional 7
Paralleling Device
Housing, Binary Inputs and Outputs
Housing 1 / 19", 6 BI, 9 BO, 1 live status contact
3
Nominal Device Current
without
Auxiliary Voltage (Power Supply, Pickup Threshold of Binary Inputs)
DC 24 V bis 48 V, Binary Input Threshold DC 19 V
DC 60 V bis 125 V 1) , Binary Input Threshold DC 19 V
DC 110 V bis 250 V 1) , AC 115 V bis 230 V, Binary Input Threshold DC 88V
DC 220 V bis 250 V 1) , AC 115 V bis 230 V, Binary Input Threshold DC 176 V
Construction
Surface-mounting housing for panel, 2-tier terminals top / bottom
Flush mounting housing, screw-type terminals (direct connection / ring and spade lugs)
Region-specific default / language settings and function versions
Region DE, 50 Hz, IEC, German Language (language can be changed)
Region World, 50 / 60 Hz, IEC / ANSI, Language English (language can be changed)
Region US, 60 Hz, ANSI, American English Language (language can be changed)
Region World, 50 / 60 Hz, IEC / ANSI, Spanish Language (language can be changed)
1) with plug-in jumper one of the 2 voltage ranges can be selected
2) for each binary input the pickup threshold ranges are interchangeable via plug-in jumpers
System interfaces (Port B)
None
System port, IEC protocol, electrical RS232
System port, IEC protocol, electrical RS485
System port, IEC protocol, optical 820 nm, ST-connector 820 nm
Analog Outputs 2 x 0 to 20 mA or 4 to 20 mA
For further protocols see Additional Information in the following L
Additional information L for further protocols (port B)
System port, Profibus DP slave, electrical RS485
System port, Profibus DP slave, optical 820 nm, twin ring, ST-connector
System port, Modbus RTU, electrical RS485
System port, Modbus RTU, optical 820 nm, twin ring, ST-connector
System Port, DNP 3.0, electrical RS485
System Port, DNP 3.0, optical 820 nm, ST-connector
IEC 61850, electrical with EN100, with RJ45-connector
IEC 61850, optical with EN100, with ST-connector
1) If the 9th position is = "B" (panel surface mounting), then the device must be ordered with the RS485–Inter-
face and a separate Optical Fibre-converter
224
6 7
V E 6 1 —
3)
3)
1)
2)
8 9 10 11 12 13 14 15 16
—
3)
3)
1)
1)
C53000-G1176-C163-3, Edition 10.2017
Zusatz
0 +
Pos. 6
Pos. 7
Pos. 8
Pos. 9
Pos. 10
Pos. 11
Supple-
mentary
+L 0 A
+L 0 B
+L 0 D
+L 0 E
+L 0 G
+L 0 H
+L 0 R
+L 0 S
SIPROTEC 4, 7VE61 and 7VE63, Manual
1
0
2
4
5
6
B
E
A
B
C
E
0
1
2
3
7
9