Memory Channel; Scan - Uniden Polaris Owner's Manual

Hide thumbs Also See for Polaris:
Table of Contents

Advertisement

UT888ZL
(POLARIS)-0708
7/8/02
8:13 PM
Page 11
When SCAN/MEM key is pressed for 2 seconds at the channel which is
stored once in the memory scan channels once, the stored channel is
canceled and MEM icon disappears.
NOTE:
Memory channel can be set up by MODE of USA, INT, and CAN.
This function in WX mode is in valid.
If [SCAN/MEM] key is pressed for 2 seconds while staying at the
channel which is in the scan mode, Triple watch scan mode and Triple
watch mode, On/Off of memory channel will be performed.
It is not possible to cancel all memory channels at the same time.
Memory Scan:
To scan channels stored in Memory Scan, press SCAN/MEM. In the
Memory Scan Mode, the POLARIS scans channel numbers previously
entered into Memory Scan. If no channel has been entered into Memory
Scan, an error tone sounds and the LCD Panel does not change.
Hail:
To access the Hail Mode, press HAIL on the microphone. The HA icon
appear in the display. Press PTT switch on the microphone , hold the
microphone approximately two inches from your mouth, and speak
clearly in a normal voice. To cancel HA, press HAIL on the microphone.
HI CAN
Weather Alert:
The Weather Alert Mode can be activated to alert you of dangerous
weather. When weather Alert is turned on, and a warning signal is
received, a siren will sound at full volume, regardless of the volume
setting. When the signal stops, you will hear the active weather channel
broadcast t normal volume.
The ALT icon indicates the Weather Alert Mode is activated. To activate
the Weather Alert Mode:
11

Advertisement

Table of Contents
loading

Table of Contents