UNIDEN Model PRO630XL Contents Introduction Features ...3 Preventive Maintenance ...4 Troubleshooting ...4 Controls / Connectors ...5 Indicators ...8 Included with Your AM CB Radio ...9 Optional Accessories ...10 DIN-E Installation... 11 Connecting the Microphone...13 Mounting the MIC Hanger ...14 Operation Turning on the Power ...16...
UNIDEN Model PRO630XL Introduction The Uniden PRO630XL is designed to provide you with years of trouble free service. Its rugged components and materials are capable of withstanding harsh environments. Please read this Operating Manual carefully to ensure you gain the optimum performance of the unit.
UNIDEN Model PRO630XL Introduction Preventive Maintenance: The following system checks should be made every six to twelve months: • Check the Standing Wave Ratio (SWR). • Inspect the tightness of all electrical connections. • Inspect the antenna coaxial cable for wear or breaks on the shielding.
UNIDEN Model PRO630XL Controls/Connectors PRO630XL Front View Controls and Connectors Rotary CHANNEL Selector MENU/ENTER - Menu and Select Button DUAL - Dual Watch ANL - Automatic Noise Limiter ) - Key Lock MEM - Memory Scan Channels SCAN - Scan On/Off...
Page 6
UNIDEN Model PRO630XL Controls/Connectors PRO630XL Rear View Connectors Power Input Connection (13.8VDC) Ext. Speaker Jack Rear MIC Jack AM Antenna Connection...
UNIDEN Model PRO630XL Controls/Connectors Standard Microphone Controls and Connectors 15 CALL - Call Tone Button 16 INST - Instant Priority Channel Button 17 PTT - Push To Talk Button 18 MICROPHONE 19 RJ45 type plug 20 Front MIC Jack Cover...
UNIDEN Model PRO630XL Included with your AM CB Radio MIC Hanger & Screws Standard Microphone AM CB Radio Owners Manual Washers and spare fuse DIN-E Sleeve, DIN-E rubber Mounting Bracket, DC Power Cord with fuse ring and keys for vehicle...
PRO630XL fits in the desired mounting area and you have all the necessary materials to complete the task. Your PRO630XL requires a 53 x 183 x 135 mm mounting area. Allow an additional 60 mm space behind the unit for connectors and wires.
Page 12
Removing the PRO630XL from the DIN-E Sleeve If you plan to use the Rear MIC Jack or connect an external speaker, at a later time, you should plan to remove the PRO630XL from the DIN-E sleeve. This is easily done using the provided Removal Keys.
UNIDEN Model PRO630XL Connecting the Microphone Front MIC Jack Rear MIC Jack Front MIC Jack Push the MIC plug at the end of the microphone into the MIC Jack until the connection locks into place. Gently tug the MIC cord to test that the connection is locked. Use the Front MIC Jack cover which is threaded onto the MIC cord to seal the MIC Jack entry from dust.
UNIDEN Model PRO630XL Mounting the MIC Hanger The MIC Hanger comes in two parts. How and where you mount the MIC Hanger will determine which parts to use. Conventional Mounting with Screws Use the front part of the MIC Hanger only.
Page 15
UNIDEN Model PRO630XL Mounting the MIC Hanger MIC Hanger mounted over MIC Cable The curly cord of the Standard Microphone can extend up to 1.5m. For practical installation of the MIC Hanger mounted over MIC Cable use this method with the Extension Cable.
UNIDEN Model PRO630XL Operation Australian AM-CB frequencies are shown in the LCD Display examples. Turning on the Power Turn the radio ON by rotating the Volume/ON/OFF control clockwise. Setting the Manual Squelch Turn the outer ring of the SQ control at the base to adjust the Squelch.
UNIDEN Model PRO630XL Operation Selecting a Channel Turn the Rotary Channel Selector at the base to select the desired channel. For your reference a list of the available channels, corresponding frequencies and guidelines for their use is printed on p.26.
UNIDEN Model PRO630XL Operation Programming the Instant Priority Channel Turn the Rotary Channel Selector at the base to select the Instant Priority Channel you prefer. [INST] Press and hold button on the microphone for 3 seconds to store the new setting. INST icon appears.
UNIDEN Model PRO630XL Operation Scanning The AM CB Radio has a scanning feature that allows you to search for active channels automatically. Furthermore, the AM CB Radio is designed to have two types of scanning; Open Scanning (OS) and Group...
UNIDEN Model PRO630XL Operation Open Scan (OS) Mode Allows continuous scanning of all selected channels. If an active channel is found, scanning will stop on that channel. If the received signal ceases, the unit will wait 3 seconds for the signal to return, otherwise scanning resumes.
UNIDEN Model PRO630XL Operation Priority Watch To switch Priority Watch On/Off; [MENU/ENTER] 1. Press 2. Turn the Rotary Channel Selector at the base to change the setting between ON or OFF. [MENU/ENTER] 3. Press [MENU/ENTER] 4. Press and hold If SCAN is deactivated while it is tuned to an active channel, the AM CB Radio will stay on that active channel.
UNIDEN Model PRO630XL Operation Busy Channel Lockout If the channel is already in use, you can prevent the AM CB Radio from transmitting . [MENU/ENTER] 1. Press The BCL setting flashes. 2. Turn the Rotary Channel Selector at the base to change the setting between ON or OFF.
UNIDEN Model PRO630XL Operation Beep On/Off [MENU/ENTER] 1. Press Beep setting flashes. 2. Turn the Rotary Channel Selector at the base to change the setting between ON or OFF. [MENU/ENTER] 3. Press setting. [MENU/ENTER] 4. Press and hold from the menu mode.
UNIDEN Model PRO630XL Operation Key Lock Use the Key Lock feature to prevent unexpected key changes. Press and hold ANL/( ) to turn key lock ON or OFF. When Key Lock is ON, PTT and VOX are still active. The Key Lock setting is remembered when if power is turned off and on.
The PRO630XL will only operate on the frequencies of the country of original purchase. The frequencies cannot be changed from one country to another. It is illegal to operate a PRO630XL set on Australian frequencies in New Zealand or a PRO630XL set on New Zealand frequencies in Australia.
Uniden, (C) Improperly installed, (D) Repaired by someone other than an authorized Uniden Repair Agent for a defect or malfunction covered by this warranty, (E) Used in conjunction with any equipment or parts or as a part of a system not manufactured by Uniden.