Uniden Polaris Owner's Manual page 39

UT888ZL (POLARIS)-0708
3-G. WHAM
You can setup the WHAM in this setup.
1. Press Menu key
2. Press PUSH – SELECT at SETUP,
then the SETUP menu will appear.
3. Rotate the PUSH – SELECT knob to
select WHAM.
4. Press PUSH – SELECT, and
following screen will appear.
3-G-1. BASE ID
When you press PUSH – SELECT at BASE ID, following screen
appears and you can input the ID.
Rotate the PUSH – SELECT knob clockwise to increase the number,
counterclockwise to decrease. The number will be decided when PUSH
– SELECT is pressed, and the blinking digit moves to the next digit.
After the BASE ID is inputted, confirmation screen appears, and you can
select either answer by rotating PUSH – SELECT knob, and press
PUSH – SELECT.
3-G-2. LINK CH
When you press PUSH – SELECT at CHANNEL, following screen
appears and you can input the ID.
7/8/02 8:13 PM Page 36
36