UT888ZL
(POLARIS)-0708
3-C. GROUP MMSI
1.
Press Menu key
2.
Rotate the PUSH – SELECT knob to
select SETUP.
3.
Press PUSH – SELECT at SETUP,
then the SETUP menu appears.
4.
Rotate the PUSH – SELECT knob to
select GROUP MMSI, and Press
PUSH – SELECT, and then following
screen appears.
5.
You can enter the GROUP MMSI
code. Rotate the Channel/Select
knob clockwise to increase the
number, counterclockwise to
decrease. The number will be
decided when PUSH – SELECT is
pressed, and the blinking digit moves
to the next digit.
6.
After the final digit is selected, the
confirmation screen appears, and
you can select either answer by
rotating PUSH – SELECT knob, and
press PUSH – SELECT.
Note:
You can program only twice, and
you needs to send Polaris back to
Uniden to be programmed.
7/8/02
8:13 PM
Page 30
30
FIPS
&&
USER MMSI
GROUP MMSI
U.I.C
DIRECTORY
AUTO.CH.SW
SET MMSI
&&
000000000