Uniden Polaris Owner's Manual page 19

UT888ZL (POLARIS)-0708
4. Press PUSH – SELECT, and MMSI
code appears, and you can call the
group member, who has registered
same MMSI code beforehand, to
communicate.
5. If ACK is received, "COMPLETE"
shows up. If ACK is not received
normally, "UNATTENDED" shows up
in the display.
1-C. ALL Ships
1. Press Menu key
2. Press PUSH – SELECT at DSC
CALL, then the DSC CALL menu will
appear.
3. Rotate the PUSH – SELECT knob to
select ALL SHIPS.
4. Press PUSH – SELECT, and the
ALL SHIPS directory appears.
5. Rotate the PUSH – SELECT knob to
select the nature of call (URGENCY,
SAFETY, ROUTINE).
6. Press PUSH – SELECT to transmit
the all ships DSC signal.
7/8/02 8:13 PM Page 16
16