...................................................................................................................................................................................................................................

Operations interfaces and administration

The 1643 AM / 1643 AMS are configured for remote and local operations management

via the Lucent Optical Management Solution and SNMP management solution. Remote

management can be realized via the STM-1 or STM-4 DCC and the Lucent OMS or

ITM-CIT software.

1643 AM / 1643 AMS is configured for remote and local operations management via

the Lucent Optical Management Solution. Remote management can be realized via the

STM-1 DCC and the Lucent OMS or locally via ITM-CIT.

Local connection is available via an RJ45 socket on the main board to connect a PC

loaded with the ITM-CIT software.

Management access features include:

• Simultaneous access by the element management system and local workstations

• Remote access to other 1643 AM / 1643 AMS in the same network by ITM-CIT

• NE level security via three password controlled authorization levels: ADMIN,

CONFIGURE and VIEW.

Maintenance supervision

Transmission and equipment fault supervision is monitored remotely via the Lucent

OMS and locally via LEDs on the unit and via the ITM-CIT. The local ITM-CIT may

also be used to remotely access other 1643 AM / 1643 AMS nodes in the same

network.

Alarm and port termination monitoring features include:

• Physical port provisioning of STM-1 or STM-4 aggregate, STM-1 tributary, E1, E3,

DS1, DS3, SHDSL, X.21 and Ethernet ports in three different modes: automatic

(AUTO), monitored (MON), or non-monitored (NMON)

• VCx (x=11,12,3,4) and P12 (egress) path termination point provisioning in either

the MON or NMON mode

• Alarm severity levels of PROMPT, DEFERRED and INFORMATION

provisionable for each alarm type by provisioning the alarm severity assignment

profile (ASAP)

• The user can assign an alarm message and severity to each MDI (miscellaneous

discrete input) by provisioning the alarm severity assignment profile (ASAP).

Failure reporting features:

• Failure reports are generated for equipment, configuration and software faults with

sufficient information to identify the next step in the fault correction process

• Alarm forwarding to the remote EMS (Element Management System) is supported

via Lucent OMS (LAN-10BaseT) and to the local workstation via the F-interface

(ITM-CIT)

5-2

Alcatel-Lucent - Proprietary

See notice on first page

365-312-801R7.2

Issue 3, May 2007

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

This manual is also suitable for:

1643 am

Operations, Administration, Maintenance And Provisioning; Operations Overview - Alcatel-Lucent 1643 AMS Applications And Planning Manual