1.3.2.
WIZ100SR Test Board
Power Switch
Power
Adapter
RJ45
Connector
☞ NOTE : Be careful of setting Mode Switch. If Mode Swich is set as Config mode, the
network function is not normally operated. For the function test, set it as Normal mode.
If LED(D5) is on, it indicates that network is connected or Config mode is set.
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
WIZ100SR Module
Collision LED
100_LED
10_LED
Link_LED
Figure 1. WIZ100SR Test Board
Mode Switch
Normal/Config
Reset Switch
RS232
Connector
10