Altronix ReServ1WP Installation Manual
  1. Manuals
  2. Brands
  3. Altronix Manuals
  4. UPS
  5. ReServ1WP
  6. Installation manual
Altronix ReServ1WP Installation Manual

Altronix ReServ1WP Installation Manual

Outdoor video surveillance ups
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Outdoor Video Surveillance UPS

Installation Guide

Models Include:
ReServ1WP
- Twelve (12) true sine wave regulated 24VAC outputs
and Four (4) regulated 12VDC outputs.
- 4A total supply current @ 24VAC and 2A total supply current @ 12VDC.
- PTC protected power-limited outputs.
ReServ2WP
- Sixteen (16) true sine wave regulated 24VAC outputs.
- 4A total supply current.
- PTC protected power-limited outputs.
ReServ3WP
- Sixteen (16) regulated 12VDC outputs.
- 8A total supply current.
- PTC protected power-limited outputs.
Rev. 082610
More than just power.
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ReServ1WP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Altronix ReServ1WP

Summary of Contents for Altronix ReServ1WP

  • Page 1: Installation Guide

    Outdoor Video Surveillance UPS Installation Guide Models Include: ReServ1WP - Twelve (12) true sine wave regulated 24VAC outputs and Four (4) regulated 12VDC outputs. - 4A total supply current @ 24VAC and 2A total supply current @ 12VDC. - PTC protected power-limited outputs.

  • Page 2: Specifications

    - up to two (2) 12VDC/12AH batteries. • Audio AC Fail and Battery Fail indicator. Stand-by Specifications: ReServ1WP - 4A (100VA) load at 24VAC and 2A load at 12VDC max. Stand-by Batteries ReServ2WP - 4A (100VA) max. load at 24VAC ReServ3WP - 8A (100VA) max.

  • Page 3: Installation Instructions

    8. ReServ3WP only - Adjust voltage for every two (2) outputs using the corresponding trimpot(s) on the board prior to connecting devices. 9. Connecting cameras/devices: ReServ1WP: Connect 12VDC cameras/devices to the terminals marked [P 1-4], [N 1-4] (Fig. 1, pg. 5). Connect 24VAC cameras/devices to the terminals marked [5-16] (Fig. 1, pg. 5).

  • Page 4: Led Diagnostics

    LED Diagnostics: Power Supply Board Red (DC) Green (AC1) Power Supply Status Normal operating condition. Loss of AC. Stand-by battery is supplying power. No DC output. Loss of AC. Discharged or no stand-by battery. No DC output. ReServ Board LED State Unit Status –...
  • Page 5 Fig. 1 - ReServ1WP and ReServ2WP Ground Lug Input -- 24VDC + Unswitched 115VAC 60Hz, 3.5A power mains (non power-limited) power- limited + BAT -- -- DC + Supervised - Non power-limited 12VDC Rechargeable Battery (order separately) Note: Two (2) 12VDC rechargeable batteries connected in series required.
  • Page 6 Fig. 2 - ReServ3WP Ground Lug Non power-limited --- 24VDC + Unswitched 115VAC 60Hz, 3.5A power mains (non power-limited) power- limited 1,2 V adjust 3,4 V adjust 5,6 V adjust 7,8 V adjust 9,10 V adjust 11,12 V adjust 13,14 V adjust 15,16 V adjust 1 OUT 2 3 OUT 4...

  • Page 7: Wall Mount Installation

    Pole Mounting Using Optional Pole Mount Kit PMK1 (not included): Note: In order to properly mount ReServ WP on a pole using Altronix PMK1, additional holes need to be drilled in the enclosure’s flanges, so the distance between those holes is 10”.
  • Page 8 17.53” x 15.3” x 6.67” (445.3mm x 388.6mm x 169.4mm) Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty | Made in U.S.A. MEMBER IIReServWP...

This manual is also suitable for:

Reserv2wpReserv3wp

Table of Contents