Table of Contents
Advertisement
Available languages
Available languages
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws • E) (2) Plastic panel clips • F) (2) Metal panel clips
• Axxess interface and harness (not shown)
A
B
The World's Best Kits.
®
Dodge Charger
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Included interface retains factory screen
• Painted matte black to match factory finish
Note: Does not retain sound from "Driver Convenience Group"
C
D
MetraOnline.com
2011-2014
E
F
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
99-6514B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
– ISO DIN radio provision with pocket .................3
– ISO DDIN radio provision ....................................3
Axxess Interface Installation .............................4-8
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Interface and harness included
Antenna Adapter: 40-EU10*
Steering wheel control interface: ASWC-1*
Backup camera retention: AX-CHRYCAM-1*
* Sold separately
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• T-30 Torx screwdriver
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 10/22/18 INST99-6514B
Advertisement
Table of Contents
Related Manuals for Metra Electronics 99-6514B
Summary of Contents for Metra Electronics 99-6514B
- Page 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 10/22/18 INST99-6514B...
-
Page 2: Dash Disassembly
DASH DISASSEMBLY 1. For vehicles with an 8 speed 2. Unclip and remove the shifter trim transmission: panel. (Figure C) Unclip and remove the top of the shift 3. Remove (2) Phillips screws securing the knob assembly. Next, remove the (1) pocket below the climate controls then exposed T-30 Torx screw from the shift unclip and remove the pocket. -
Page 3: Iso Ddin Radio Provision
KIT ASSEMBLY ISO DIN radio provision with pocket ISO DDIN radio provision 1. Attach the provided clips to the radio 1. Attach the provided clips to the radio Clip Clip locations locations trim panel (metal clips at top and plastic trim panel (metal clips at top and plastic at the bottom). -
Page 4: Table Of Contents
AXXESS INTERFACE INSTALLATION INTERFACE FEATURES TABLE OF CONTENTS • Provides accessory power (12-volt 10-amp) Connections ..............................5 Installation ...............................6 • Retains R.A.P. (retained accessory power) Programming ............................6 • Used in amplified or non-amplified systems Final assembly ............................6 • Provides NAV outputs (parking brake, reverse, and speed sense) Audio level adjustment ...........................6 •... -
Page 5: Provides Accessory Power (12-Volt 10-Amp) Connections
CONNECTIONS TO BE MADE From the 16-pin harness with stripped leads to the aftermarket radio: • Connect the White wire to the left front positive speaker output • Connect the Red wire to the accessory wire. • Connect the White/Black wire to the left front negative speaker output Note: If also installing an ASWC-1 (sold separately), there will be a Red wire on the 6514 •... -
Page 6: Retains R.a.p. (Retained Accessory Power) Installation
3. Once at a desired level, audio level adjustment is complete. 4. Connect the climate control harness from the vehicle to the 99-6514B radio trim panel. This is the harness that was removed in step 4 of dash disassembly . -
Page 7: Video Option Screen
VIDEO OPTION SCREEN 1. The settings screen provides access to 2. Once in the Customize menu, select some of the factory settings retained, Video Input 2 to select a desired source. and also the options available with the Please note that Video Input 1 is not kit. -
Page 8: Updating
Note 2: Please note which firmware downloaded to the interface. This will help in troubleshooting, if need be. 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 10/22/18 INST99-6514B... -
Page 9: Dodge Charger
Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 10/22/18 INST99-6514B... - Page 10 DESMONTAJE DEL TABLERO 1. Para vehículos con transmisión de 8 2. Desenganche y quite el panel de moldura velocidades: de la palanca de velocidades. (Figura C) Desenganche y quite la parte superior 3. Quite los (2) tornillos Phillips que sujetan del ensamble de la perilla de la palanca la cavidad debajo de los controles del de velocidades.
- Page 11 ENSAMBLE DEL KIT Provisión de radio ISO DIN con cavidad Provisión de radio ISO DDIN Ubicación Ubicación 1. Una los ganchos proporcionados al panel de 1. Una los ganchos proporcionados al de clips de clips la moldura del radio (ganchos metálicos panel de la moldura del radio (ganchos en la parte de arriba y plásticos en la metálicos en la parte de arriba y plásticos...
- Page 12 INSTALACIÓN DE LA INTERFASE AXXESS CARACTERÍSTICAS DE LA INTERFASE INDICE • Provee corriente de accesorios (12 voltios 10 amperes) Conexiones ...............................5 Instalación ..............................6 • Retiene R.A.P. (corriente de accesorio retenida) Programación ............................6 • Utilícese en sistemas amplificados o no amplificados Montaje final ............................6 •...
- Page 13 CONEXIONES Del arnés de 16 pins con conectores pelados al radio de mercado secundario: • Conecte el cable blanco con la salida positiva de la bocina izquierda delantera. • Conecte el cable rojo al cable de accesorios. • Conecte el cable blanco/negro con la salida negativa de la bocina izquierda delantera. Nota: Si también instala un ASWC-1 (se vende por separado), también se conectará...
- Page 14 Select “8-inch screen” once prompted to. Instructions to 2. Vuelva a armarlo al revés de como lo desarmó usando el panel de moldura del radio 99-6514B. update the interface are available at the end of this instruction booklet.
- Page 15 PANTALLA DE OPERACIÓN DE VIDEO 1. La pantalla de configuración 2. Una vez en el menú Customize, proporciona acceso a algunas de las seleccione Video Input 2 para configuraciones de fábrica retenidas, seleccionar la fuente deseada. Tenga en y también a las opciones disponibles cuenta que la entrada de video 1 no está...
- Page 16 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 10/22/18 INST99-6514B...
Need help?
Do you have a question about the 99-6514B and is the answer not in the manual?
Questions and answers