Begin Transmission - Sharp MX-7001 User Manual

Transmission begins
When transmission ends, image settings and convenient special mode settings are cleared.
To cancel scanning...
Press the [STOP] key (
System Settings (Administrator): Default Display Settings
The settings can be kept in effect a fixed period of time after scanning is completed.

Begin transmission

).
Scan the original and send the fax.
If the original is placed on the document glass, follow these
steps to start scanning and transmission:
When sending a fax normally (memory transmission)
(1) Press the [BLACK & WHITE START] key (
(2) When scanning is finished, replace the original with the
next original.
(3) Press the [BLACK & WHITE START] key (
(4) Repeat steps (2) and (3) until all originals have been
scanned.
(5) Touch the [Read-End] key.
When sending a fax in direct transmission mode
Multiple originals cannot be scanned in direct transmission
mode.
Press the [BLACK & WHITE START] key (
transmission.
14
).
).
) to start